XY-SR210 6.5KW Palletizing Robot Arm 210kg , bag carton drum bottle palletizer
Brief Introduction
Eagle XY-SR serious palletizing robot is four-degree cylinder surface coordinate palletizing robot, mainly move by horizontal movement axis, vertical movement axis, rotation foundation and hand axis.
The palletizing robot is constituted of palletizing robot body, robot hand, robot gripper, robot base and so on parts.
The multilayer of palletizing enables the fork moves them into storehouse. This equipment adopts PLC touch screen and intelligent managing which us not only simple and easy to master, but also reduce labor.
Function characteristics
1. PLC controller, easy to use
2. Let linear motion come true, simplify control system
3. Simple structure, low failure rate and convenient maintenance
4. Few main parts and accessories, low maintenance cost
5. Low power consumption, only 1/3 consumption of the same kind of mechanical stacker crane from other companies
6. Only need a little floor space, floor utilization ratio is high
7. Diverse gripper, flexibly adapt various palletizing requirements
Technical parameters
Software Unit
1. Chinese and English or other language supplied operating.
2. Main machine parts use famous brand motor like SEW.
3. Built-in palletizing software package.
4. Convenient to confirm the status of the pallet.
5. Precise positioning of the pallet position.
6. Easy to choose the job and writing mode.
Package and Shipping
Machine film wrapped and packed in exported fumigation wooden cases, then transported to departure port which customer required like Shanghai, Ningbo, Qingdao, Suzhou etc.
We can also transport the machines by flight, all depend on client's requirement.
Installation Instructions
We will supply you the user manual and electrical drawing of all the machines for you to install the machines by yourself. If you think you cannot install the machines by yourself, we can send engineer to your factory for installing and debugging etc.
Commission and After-sale Service
We make accurate factory layout design according to customer's factory size; if the customer needed, we could make workshop design with electric power, water supply, gas power, material storage, final storages, workers' restroom, etc.
If customer need, we will send engineer for the commissioning service. 1-2 of our engineer will
go to your factory to install and adjust the processing line to realize normal production at shortest time.
Our engineers have responsibility to train and teach the workers how to operate, clean, maintain the repair all the machine, until the worker could well operate the production line.
It normally costs 10 days for the commissioning service, and we supply 1-year guarantee from the date of completion of commissioning service.
The engineer's round-trip flight tickets, accommodation and daily salary USD 60-100 are on client's account.
Electric Parts
Robot Photos
Customize Contact Us
You would like to know the detail offer of the machines, please confirm your detail requirements (information as below) for the whole project so that we can suggest the best suitable machine model for you.
1. What's your product? Packed in bag or carton or others?
2. How many packages per hour?
3. Can you send me the layout of your current workshop? We have to design the drawing of the whole line based on your workshop layout. If no, please tell us the available sizes of your workshop.
4. What's the height of full pallet (without the empty pallet thickness)?
5. What's the palletizing type (how many bags per layer, how many layers per pallet, how the bags are put on each layer)?
6. What's the sizes (length, width, height) of empty pallet?
7. Do you want auto pallet magazine?
8. What's your country voltage?
FAQ
Q: Can your machine be customized?
A: Yes, we are a professional manufacturer specilized in palletizing robot, packaging machine, conveyor etc. for more than 10 years and we have a strong design&technical team. We can design and manufacture as per your requirements.
Q: How to get an accurate quotation?
A: Please provide us the detail of the workpiece such as drawing and dimensions.
Q: What's the shipping cost from China to your country?
A: We can send machine to your port by sea or other term you need. Please kindly tell us your nearest port or address with code. We have reliable shipping agent to ensure the safe, convenient and timely delivery.
Q: Payment terms, MOQ, warranty, Trade Terms
A: Payment terms: 30% down payment against order by T/T, the balance of 70% to be paid on delivery. Minimum order quantity: 1 set, FOB Shanghai Delivery time: about 20-30 working days after receipt of formal order and 30% deposit. Warranty: 12 months following delivery. We offer online service 24 hours all day long, Skype, Email etc. You can contact us any time, if urgently, please call us.
Brief Introduction
Eagle XY-SR serious palletizing robot is four-degree cylinder surface coordinate palletizing robot, mainly move by horizontal movement axis, vertical movement axis, rotation foundation and hand axis.
The palletizing robot is constituted of palletizing robot body, robot hand, robot gripper, robot base and so on parts.
The multilayer of palletizing enables the fork moves them into storehouse. This equipment adopts PLC touch screen and intelligent managing which us not only simple and easy to master, but also reduce labor.
Function characteristics
1. PLC controller, easy to use
2. Let linear motion come true, simplify control system
3. Simple structure, low failure rate and convenient maintenance
4. Few main parts and accessories, low maintenance cost
5. Low power consumption, only 1/3 consumption of the same kind of mechanical stacker crane from other companies
6. Only need a little floor space, floor utilization ratio is high
7. Diverse gripper, flexibly adapt various palletizing requirements
Technical parameters
| Model | XY-SR-130 | XY-SR-210 | |
| Drive | AC servo motor drive | ||
| Movement method | Cylinder coordinates type | ||
| Installation | On floor | ||
| Max Palletizing Weight(contains weight of gripper) | 130kgs | 210kgs | |
| Handing Capacity | 1500 Times/Hour | 1700 Times/Hour | |
| Movement axis | Normally 4 axis: A, B, C, D (can be 6 axis) | ||
| Movement scope | A-Axis(Horizontal) | 1300mm | 1500mm |
| B-Axis(Vertical) | 2100mm | 2300mm | |
| C-Axis(Body) | 330° | ||
| D-Axis (Gripper) | 330° | ||
| Machine tongs | pallet, finger, sucker and so on | ||
| Palletizing memory ability | (400 Normally 30kinds(the most can be 400kinds) | ||
| Teaching method | Manual teaching/teaching support/teaching cancel(optional) | ||
| Power | 4.5KVA | 6.5KVA | |
| Compressed Air | 0.5Mpa | 0.5Mpa | |
| Location Accuracy | ±0.5mm | ||
| Robot Weight(not contains weight of gripper) | 800kgs (+/-10%) | 1150kgs (+/-10%) | |
Software Unit
1. Chinese and English or other language supplied operating.
2. Main machine parts use famous brand motor like SEW.
3. Built-in palletizing software package.
4. Convenient to confirm the status of the pallet.
5. Precise positioning of the pallet position.
6. Easy to choose the job and writing mode.
Package and Shipping
Machine film wrapped and packed in exported fumigation wooden cases, then transported to departure port which customer required like Shanghai, Ningbo, Qingdao, Suzhou etc.
We can also transport the machines by flight, all depend on client's requirement.
Installation Instructions
We will supply you the user manual and electrical drawing of all the machines for you to install the machines by yourself. If you think you cannot install the machines by yourself, we can send engineer to your factory for installing and debugging etc.
Commission and After-sale Service
We make accurate factory layout design according to customer's factory size; if the customer needed, we could make workshop design with electric power, water supply, gas power, material storage, final storages, workers' restroom, etc.
If customer need, we will send engineer for the commissioning service. 1-2 of our engineer will
go to your factory to install and adjust the processing line to realize normal production at shortest time.
Our engineers have responsibility to train and teach the workers how to operate, clean, maintain the repair all the machine, until the worker could well operate the production line.
It normally costs 10 days for the commissioning service, and we supply 1-year guarantee from the date of completion of commissioning service.
The engineer's round-trip flight tickets, accommodation and daily salary USD 60-100 are on client's account.
Electric Parts
Robot Photos
Customize Contact Us
You would like to know the detail offer of the machines, please confirm your detail requirements (information as below) for the whole project so that we can suggest the best suitable machine model for you.
1. What's your product? Packed in bag or carton or others?
2. How many packages per hour?
3. Can you send me the layout of your current workshop? We have to design the drawing of the whole line based on your workshop layout. If no, please tell us the available sizes of your workshop.
4. What's the height of full pallet (without the empty pallet thickness)?
5. What's the palletizing type (how many bags per layer, how many layers per pallet, how the bags are put on each layer)?
6. What's the sizes (length, width, height) of empty pallet?
7. Do you want auto pallet magazine?
8. What's your country voltage?
FAQ
Q: Can your machine be customized?
A: Yes, we are a professional manufacturer specilized in palletizing robot, packaging machine, conveyor etc. for more than 10 years and we have a strong design&technical team. We can design and manufacture as per your requirements.
Q: How to get an accurate quotation?
A: Please provide us the detail of the workpiece such as drawing and dimensions.
Q: What's the shipping cost from China to your country?
A: We can send machine to your port by sea or other term you need. Please kindly tell us your nearest port or address with code. We have reliable shipping agent to ensure the safe, convenient and timely delivery.
Q: Payment terms, MOQ, warranty, Trade Terms
A: Payment terms: 30% down payment against order by T/T, the balance of 70% to be paid on delivery. Minimum order quantity: 1 set, FOB Shanghai Delivery time: about 20-30 working days after receipt of formal order and 30% deposit. Warranty: 12 months following delivery. We offer online service 24 hours all day long, Skype, Email etc. You can contact us any time, if urgently, please call us.